Hi Resolution and Precise results. The HRT cell includes two built-in weights. Together with FACT, this allows the balance/scale to automatically perform adjustment and linearization.
Efficient Handling, Reduce the number of movements. Open the draft shield ErgoDoor with one hand and simultaneously place the weighing sample with your other hand.
Saves space thanks to split draft shield doors that do not project bond the balance, and sideways mounted connections at the back of the balance.
Applications included: Weighing, Piece counting, Percent weighing, Statistics, Totaling, Multiplication factor, Division factor and Density.
Please keep the original packaging. You will need this in cases where you transport the scale, remember the scale has a glass draft shield.
Included:
Efficient Handling, Reduce the number of movements. Open the draft shield ErgoDoor with one hand and simultaneously place the weighing sample with your other hand.
Saves space thanks to split draft shield doors that do not project bond the balance, and sideways mounted connections at the back of the balance.
Applications included: Weighing, Piece counting, Percent weighing, Statistics, Totaling, Multiplication factor, Division factor and Density.
Please keep the original packaging. You will need this in cases where you transport the scale, remember the scale has a glass draft shield.
Included:
- Balance with Draftshield
- Weighing pan with pan support
- Draft ring
- Drip tray
- Protective cover
- AC adapter
- Country specific power cable
- Operating instructions (this document)
- Quick Guide
- EC declaration of conformity
- Maximum Capacity 120 g
- Maximum load, fine range 42 g
- Readability 0.1 mg
- Readability, fine range 0.01 mg
- Repeatability (sd) 0.08 mg (100 g)
- Repeatability (sd) , typ. 0.06 mg (100 g)
- Repeatability (sd), fine range 0.03 mg (40 g)
- Repeatability (sd), fine range at low load 0.02 mg (20 g)
- Repeatability (sd) at low load , typ. 0.015 mg (20 g) 2)
- Minimum Weight (U=1%, k=2), typical 3 mg
- Adjustment Internal / FACT
- Weighing Pan Diameter 80 mm
- Legal for Trade Yes
- Repeatability (typical) 0.015 mg
- Linearity 0.15 mg
- Linearity, typically 0.02 mg
- Sensitivity offset 1) 0.4 mg (100 g)
- Sensitivity offset, typ. 1) 0.3 mg (100 g)
- Minimum weight (acc. to USP), typ. 45 mg 2)
- Minimum weight (U=1%, k=2), typ. 3 mg 2)
- Minimum weight (OIML) 1 mg
- Settling time, typ. 4 s / 8 s
- Dimensions inches (DxHxW) 14 x 13 x 9.75
- Housing Die-cast aluminum, plastic PA-12
- Interfaces RS232+USB device
- Hygenic Design Yes
- Display High contrast display HCD